This coating is ideal for marine, industrial, and infrastructure surfaces that are prone to biofouling. Suitable surfaces include painted or bare metal, GRP, marine plastics, underwater equipment, ship hulls, offshore platforms, and submerged surfaces in coastal or brackish water zones.

Yes, the coating is completely transparent and does not alter the surface’s appearance, gloss, or color.

The average coverage area is 12-15 ml/m², depending on the porosity and surface texture.

Use microfiber applicators or HVLP spray systems. For large surfaces like ship hulls or metal structures, spray application by trained personnel is recommended.

The surface must be dry, clean, and free from grease, salts, and any previous biofilm or coatings. Ensure it is thoroughly dried, especially in hard-to-reach areas.

Apply in dry conditions at temperatures above 5°C. The coating is touch-dry in 1 hour and water-resistant in 8-12 hours. Full curing takes 5-7 days at room temperature, but it can cure faster with elevated heat.

Follow the Safety Data Sheet and ensure that proper personal protective equipment (PPE) is worn. Only trained personnel should perform the application.

No, painting over the coating is not recommended, as it repels most paints and coatings. Painting should only be done before application.

The coating will not discolour, crack, or peel off. It is UV-stable and forms a highly durable bond with the substrate once cured.

The coating can be removed for repainting, but this requires sanding or abrasion. It cannot be removed with standard chemical cleaners.

Use pH-neutral to mildly alkaline cleaners (pH 3-12). Biofouling is easier to remove with gentle brushing or pressure cleaning, avoiding harsh chemicals.