Nanocoatings for Metals Plastics Painted Surfaces

You are here: / / Nanocoatings for Metals Plastics Painted Surfaces

  • BSB60 NANO COATINGS FOR PLASTIC, METAL, PAINTED SURFACES, THERMOSET AND ALLOYS

    NANO COATINGS OFFER STRONG AND ROBUST PROTECTION AGAINST HARSH AMBIENT CONDITIONS OR PRODUCTION FACILITIES

    The photo shows the bell and part of the handlebars of a bicycle completely damaged by rust. BSB60 has a wide range of nanocoatings for environmental protection of metals, plastics, and painted surfaces, with different properties and specifications that can be applied to thermosets, thermoplastics, painted surfaces, metals, and alloys

Nanocoatings for metals plastics and painted surfaces.

We have divided this section of our nanocoatings by application surface. We have a wide range of nanocoatings for metals, plastics and painted surfaces with different properties and specifications that can be applied to thermosets, thermoplastics, painted surfaces, metals and alloys. Metal and plastic surfaces, painted or unpainted, are used everywhere. Whether you are looking for nano-coatings for the moulds of your production plant, the components of a machine or the end product itself, the quality and durability of the coating must be your priority. Below you will find detailed information and data sheets on our coatings in this category.

Our nanocoatings products do not contain PFOS/PFOA. They are eco-friendly, non-toxic, safe and REACH compliant products.

Application Areas

Civil industry

Plastic manufacturers, general production companies, land/sea/air vehicle manufacturers, metal manufacturers/handlers, cleaning/maintenance companies, machine manufacturers, construction companies etc..

Highlights

BSB60 nanocoatings for metal plastic painted surfaces can be applied to a wide range of surfaces, including:

  • Metals and alloys: such as steel, aluminum, copper, bronze, and magnesium
  • Plastics: both thermoplastics and thermosets
  • Painted surfaces: to protect and enhance the appearance of paintwork
  • Composite materials: to increase strength and durability
  • Paint protection films (PPF): such as polyurethane and PVC films

These surfaces can be used in a variety of industries including manufacturing, automotive, construction, and maintenance.

Armed Forces

1
2
3
Special Forces soldier in the pouring rain. AI-generated image
1

The utilisation of nanotechnology coatings has the potential to render surfaces impermeable and facilitate straightforward decontamination in the event of exposure to harmful agents.

2

Nanotechnology coatings can reduce friction between mechanical components, improving efficiency and reducing wear and tear

3

Nanomaterial coatings protect metals and alloys from oxidation, extending the life of weapons and vehicles even in hostile environments such as deserts or marine waters.

AI-generated image

The employment of nanotechnology coatings on weaponry and military equipment signifies a substantial technological advancement, offering enhancements in terms of protection, operational efficiency, and adaptability to environmental conditions.

Info-circled Info-circled For more information contact us

Discover our extensive range of nanotechnology coatings

Anti-fouling Anti-graffiti Anti-slip for Ceramics Address Address icon Anti-slip for Marble Anti-Viral Glass - Ceramic Metal - Plastics Nano Electro Protect Natural Stone Solar Panel Super-Hydrophobic Surface Coating for Metal Temporary Protection Textile

Choose the Surface or Property Below to See Nanocoatings Product Details for Metals Plastics and Painted Surfaces

BSB60 Omniphob M59BSB60 Omniphob M39BSB FCCBSB60 Omniphob M17BSB60 MP55BSB60 P45BSB60 MG09BSB60 M06BSB60 M07
PreviousNext

 BSB60 Omniphob M59

BSB60 Omniphob M59 is a state-of-the-art nano layer formulation that has been developed for hard, smooth surfaces and ensures protection against environmental conditions whilst giving hydrophobic and oleophobic effect in a single layer of coating to applied surfaces listed below:

  • Metals & Alloys
  • Painted Surfaces
  • Thermosets & Thermoplastics
  • Composite Materials

Benefits & Key Features

√ Water and oil repellency

√ Chemical resistance

√ UV protection

√ Easy to clean

√ Scratch resistance

Specifications

Packaging 30 L
Appearance Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Pencil Hardness (ISO-15184:2012) 10H
Dry Film Thickness 0.8-1.1 µm
Consumption per Unit Area 4-5 mL/m2
Density @23°C 0.87 g/cm3
pH Value 5.5-6
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 150°C
Water Contact Angle 107° @10 µL
Water Contact Angle After “10000“
Wet Scrub (ISO-11998:2006)		 101° @10 µL
Water Sliding Angle 17° @20 µL
Oil Contact Angle 87° @10 µL
Gloss Rate @60° (ISO-2813:2014) 96 (Acrylic)
Packaging 30 L
Appearance Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Pencil Hardness (ISO-15184:2012) 10H
Dry Film Thickness 0.8-1.1 µm
Consumption per Unit Area 4-5 mL/m2
Density @23°C 0.87 g/cm3
pH Value 5.5-6
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 150°C
Water Contact Angle 107° @10 µL
Water Contact Angle After “10000“
Wet Scrub (ISO-11998:2006)		 101° @10 µL
Water Sliding Angle 17° @20 µL
Oil Contact Angle 87° @10 µL
Gloss Rate @60° (ISO-2813:2014) 96 (Acrylic)

BSB60 Omniphob M39

BSB60 Omniphob M39 is the ultimate nano protection product which brings hydrophobic and oleophobic effects in a single layer of coating to applied surfaces listed below:

  • Metals & Alloys
  • Painted Surfaces
  • Thermosets & Thermoplastics
  • Composite Materials

Benefits & Key Features

√ Water and oil repellency

√ Chemical resistance

√ UV protection

√ Easy to clean

√ Scratch resistance

Specifications

Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Pencil Hardness (ISO-15184:2012) 10H
Dry Film Thickness 700-800 nm
Consumption per Unit Area 4-5 mL/m2
Density @23°C 0.86 g/cm3
pH Value 5-5.5
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 150°C
Water Contact Angle 105° @10 µL
Water Contact Angle After “3000” Wet Scrub (ISO-11998:2006) 100° @10 µL
Water Sliding Angle 10° @20 µL
Oil Contact Angle 84° @10 µL
Gloss Rate @60° (ISO-2813:2024) 96 (Acrylic)
Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Pencil Hardness (ISO-15184:2012) 10H
Dry Film Thickness 700-800 nm
Consumption per Unit Area 4-5 mL/m2
Density @23°C 0.86 g/cm3
pH Value 5-5.5
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 150°C
Water Contact Angle 105° @10 µL
Water Contact Angle After “3000” Wet Scrub (ISO-11998:2006) 100° @10 µL
Water Sliding Angle 10° @20 µL
Oil Contact Angle 84° @10 µL
Gloss Rate @60° (ISO-2813:2024) 96 (Acrylic)

BSB60 FCC

BSB60 FCC is a flexible film coating for PPF, providing high water repellency and easy-to-clean properties without affecting the characteristics of the underlying protective film, such as self-healing or matt finish, and extends the lifetime of PPF. Suitable materials are listed below:

  • Paint Protection Films (PPF)
  • Polyurethane (PU) – Matt & Transparent
  • High Quality PVC Films
  • Vinyls

Benefits & Key Features

√ Water and oil repellency

√ Visually not detectable

√ Chemical resistance

√ Does not block self-healing

√ Easy to clean

Specifications

Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Consumption per Unit Area 2-3 mL/m2
Density @23°C 0.802 g/cm3
pH Value 7.2-7.7
Application Temperature 5°C/30°C (≤50% RH)
Water Contact Angle 102° @10 µL
Water Contact Angle After “5000” Wet Scrub (ISO-11998:2006) 95° @10 µL
Water Sliding Angle 12°-18° @20 µL
Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Consumption per Unit Area 2-3 mL/m2
Density @23°C 0.802 g/cm3
pH Value 7.2-7.7
Application Temperature 5°C/30°C (≤50% RH)
Water Contact Angle 102° @10 µL
Water Contact Angle After “5000” Wet Scrub (ISO-11998:2006) 95° @10 µL
Water Sliding Angle 12°-18° @20 µL

BSB60 Omniphob M17

BSB60 Omniphob M17 is an economic nano protection product which is preferred in various sectors and provides hydrophobic and oleophobic effects to the applied surfaces listed below:

  • Metals & Alloys
  • Painted Surfaces
  • Thermosets & Thermoplastics
  • Composite Materials

Application Surfaces

  • Exterior/interior plastic surfaces

Benefits & Key Features

√ Water and oil repellency

√ Stain resistance

√ Breathable coating

√ Easy to clean

Specifications

Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Pencil Hardness (ISO-15184:2012) 7H
Dry Film Thickness 200-300 nm
Consumption per Unit Area 5-8 mL/m2
Density @23°C 0.8 g/cm3
pH Value 4.8-5
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 275°C
Water Contact Angle 97° @10 µL
Water Contact Angle After “2000” Wet Scrub (ISO-11998:2006) 92° @10 µL
Water Sliding Angle 25° @20 µL
Oil Contact Angle 76° @10 µL
Gloss Rate @60° (ISO-2813:2024) 93 (Acrylic)
Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Pencil Hardness (ISO-15184:2012) 7H
Dry Film Thickness 200-300 nm
Consumption per Unit Area 5-8 mL/m2
Density @23°C 0.8 g/cm3
pH Value 4.8-5
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 275°C
Water Contact Angle 97° @10 µL
Water Contact Angle After “2000” Wet Scrub (ISO-11998:2006) 92° @10 µL
Water Sliding Angle 25° @20 µL
Oil Contact Angle 76° @10 µL
Gloss Rate @60° (ISO-2813:2024) 93 (Acrylic)

BSB60 MP55

BSB60 MP55 is a one-component rust and corrosion resistant nano-coating product that protects the applied surfaces against harmful environmental conditions. Suitable materials are listed below:

Metals & Alloys

  • Cast Iron
  • Steel (Carbon, Stainless etc.)
  • Aluminum
  • Copper
  • Bronze
  • Nickel
  • Magnesium

Benefits & Key Features

√ Water and oil repellency

√ Rust and corrosion resistance

√ Chemical resistance

√ UV protection

√ Easy to clean

Specifications

Packaging 1-5-30 L
Appearence Yellowish Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Dry Film Thickness 600-800 nm
Consumption per Unit Area 5-8 mL/m2
Density @23°C 0.816 g/cm3
pH Value 5.5-6
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 275°C
Water Contact Angle 106° @10 µL
Water Sliding Angle 12° @20 µL
Oil Contact Angle 89° @10 µL
Packaging 1-5-30 L
Appearence Yellowish Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Dry Film Thickness 600-800 nm
Consumption per Unit Area 5-8 mL/m2
Density @23°C 0.816 g/cm3
pH Value 5.5-6
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 275°C
Water Contact Angle 106° @10 µL
Water Sliding Angle 12° @20 µL
Oil Contact Angle 89° @10 µL

BSB60 P45

BSB60 P45 is a coating material that renews the appearance and restores the color of the interior and exterior plastic surfaces on which it is applied. It preserves the new appearance for up to 2 years. Thanks to its water repellency, it also helps to keep the surface clean.

Application Surfaces

  • Exterior/interior plastic surfaces

Benefits & Key Features

√ Water and oil repellency

√ Chemical resistance

√ UV protection

√ Easy to clean

√ Scratch resistance

√ Renovation

Specifications

Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Dry Film Thickness 700-1000 nm
Consumption per Unit Area 5-8 mL/m2
Density @23°C 0.86 g/cm3
pH Value 7
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability –
Water Contact Angle 115° @10 µL
Water Sliding Angle 20° @20 µL
Oil Contact Angle 34° @10 µL
Gloss Rate @60° (ISO-2813:2024) 80
Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Dry Film Thickness 700-1000 nm
Consumption per Unit Area 5-8 mL/m2
Density @23°C 0.86 g/cm3
pH Value 7
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability –
Water Contact Angle 115° @10 µL
Water Sliding Angle 20° @20 µL
Oil Contact Angle 34° @10 µL
Gloss Rate @60° (ISO-2813:2024) 80

BSB60 Omniphob MG09

BSB60 Omniphob MG09 is an easily applicable nano ceramic coating doped with graphene and it is preferred in various sectors. With the inclusion of graphene, it has some improved characteristics such as long-lasting, easy to clean, higher hydrophobicity, along with deep shine that awakens the paint color, higher stain and scratch resistance. Suitable materials are listed below:

Application Surfaces

  • Metals & Alloys
  • Painted Surfaces
  • Thermosets & Thermoplastics
  • Composite Materials

Benefits & Key Features

√ Water and oil repellency

√ Chemical resistance

√ UV protection

√ Easy to clean

√ Scratch resistance

√ High gloss effect

√ Increased depth and clarity of the surface.

Specifications

Packaging 1-5-30 L
Appearence Black Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Dry Film Thickness 400-500 nm
Consumption per Unit Area (Manual Application) 5-8 mL/m2
Density @23°C 0.83 g/cm3
pH Value 4.5-5
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 275°C
Water Contact Angle 104° @10 µL
Water Contact Angle After “3000” Wet Scrub (ISO-11998:2006) 101° @10 µL
Water Sliding Angle 12° @20 µL
Oil Contact Angle 70° @10 µL
Gloss Rate @60° (ISO-2813:2024) 95 (Acrylic)
Pencil Hardness (ISO-15184:2012) 7H
Dry to Touch Time 4h
Packaging 1-5-30 L
Appearence Black Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Dry Film Thickness 400-500 nm
Consumption per Unit Area (Manual Application) 5-8 mL/m2
Density @23°C 0.83 g/cm3
pH Value 4.5-5
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 275°C
Water Contact Angle 104° @10 µL
Water Contact Angle After “3000” Wet Scrub (ISO-11998:2006) 101° @10 µL
Water Sliding Angle 12° @20 µL
Oil Contact Angle 70° @10 µL
Gloss Rate @60° (ISO-2813:2024) 95 (Acrylic)
Pencil Hardness (ISO-15184:2012) 7H
Dry to Touch Time 4h

BSB60 Omniphob M06

BSB60 Omniphob M06 is an economic and easily applicable nano protection product which provides hydrophobic and oleophobic effects to hard and smooth surfaces listed below:

Application Surfaces

  • Metals & Alloys
  • Painted Surfaces
  • Thermosets & Thermoplastics
  • Composite Materials

Benefits & Key Features

√ Water and oil repellency

√ Chemical resistance

√ UV protection

√ Easy to clean

Specifications

Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Dry Film Thickness 200-300 nm
Consumption per Unit Area (Manual Application) 4-5 mL/m2
Density @23°C 0.8 g/cm3
pH Value 4.7-5
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 275°C
Water Contact Angle 95° @10 µL
Water Contact Angle After “3000” Wet Scrub (ISO-11998:2006) 92° @10 µL
Water Sliding Angle 22° @20 µL
Oil Contact Angle 76° @10 µL
Gloss Rate @60° (ISO-2813:2024) 91 (Acrylic)
Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Dry Film Thickness 200-300 nm
Consumption per Unit Area (Manual Application) 4-5 mL/m2
Density @23°C 0.8 g/cm3
pH Value 4.7-5
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 275°C
Water Contact Angle 95° @10 µL
Water Contact Angle After “3000” Wet Scrub (ISO-11998:2006) 92° @10 µL
Water Sliding Angle 22° @20 µL
Oil Contact Angle 76° @10 µL
Gloss Rate @60° (ISO-2813:2024) 91 (Acrylic)

BSB60 Omniphob M07

BSB60 Omniphob M07 is an economic nano protection product which provides hydrophobic and oleophobic effects to hard and smooth surfaces. It can be applied as a single layer or two layers according to your preference to the surfaces listed below:

Application Surfaces

  • Metals & Alloys
  • Painted Surfaces
  • Thermosets & Thermoplastics
  • Composite Materials

Benefits & Key Features

√ Water and oil repellency

√ Chemical resistance

√ UV protection

√ Easy to clean

Specifications

Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Dry Film Thickness 200-300 nm – 300-400 nm
Consumption per Unit Area (Manual Application) 2-3 mL/m2
Density @23°C 0.8 g/cm3
pH Value 8-9
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 275°C
Water Contact Angle 98° @10 µL – 100° @10 µL
Water Contact Angle After “3000” Wet Scrub (ISO-11998:2006) 93° @10 µL
Water Sliding Angle 26° @20 µL – 15° @20 µL
Oil Contact Angle 78° @10 µL
Gloss Rate @60° (ISO-2813:2024) 94 (Acrylic)
Packaging 1-5-30 L
Appearence Colorless Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Moisture Resistance √
Dry Film Thickness 200-300 nm – 300-400 nm
Consumption per Unit Area (Manual Application) 2-3 mL/m2
Density @23°C 0.8 g/cm3
pH Value 8-9
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability 275°C
Water Contact Angle 98° @10 µL – 100° @10 µL
Water Contact Angle After “3000” Wet Scrub (ISO-11998:2006) 93° @10 µL
Water Sliding Angle 26° @20 µL – 15° @20 µL
Oil Contact Angle 78° @10 µL
Gloss Rate @60° (ISO-2813:2024) 94 (Acrylic)