Textile waterproofing repellent liquids

You are here: / / Textile waterproofing repellent liquids

  • WATER REPELLENT NANO COATINGS FOR TEXTILE AND LEATHER

    PROTECT TEXTILE AND FABRIC FURNISHINGS FROM STAIN, WATER AND UV

    Nano Coatings for Textile and Leather

Water repellent nano coatings for textile and leather

Whether you are looking to protect your favorite outfit from coffee stains, your shiny shoes from mud or salt damage, or to keep your car looking like it has just been washed, nano coatings could offer the perfect solution. The same benefits are also valid in the case of industrial usage, you can improve your products by applying nano coating on them. Think about outdoor clothing, furnishings, shoes, and even face masks you can add hydrophobicity or anti-stain properties to your product while keeping them breathable and transparent. Durability and laundry will not be your concern in the case of BSB60 nano coatings, our solutions are washing-resistant. BSB60 T Series Nano Coatings are the solution if you are searching for the best fabric waterproofing spray in the market.

Our products do not contain PFOS/PFOA. They are eco-friendly, non-toxic, safe, and REACH-compliant products.

Application Areas

Civil industry

Furniture manufacturers, fabric manufacturers, carpet/rug manufacturers, land/sea/air vehicle manufacturers, leather manufacturers/handlers, hotels, cleaning/maintenance companies, restoration companies, clothing and technical textile companies, shoe manufacturers, etc..

With the nano fabric waterproofing spray, you can protect textiles, and leather

How to apply the nano coating spray on the fabric?

Applying nano coating spray to textiles is a relatively simple process, but it is important to follow certain guidelines to achieve the best results. Here are the general steps to follow:

  • Surface preparation: Ensure that the fabric is clean and dry. Remove any stains or dirt as the presence of contaminants can affect the adhesion of the nano coating.
  • Test on a small area: Before applying the product to the entire surface, it is advisable to test it on a small, concealed area of the fabric to ensure that there are no unwanted reactions or color changes.
  • Shake the bottle: Shake the spray bottle well before use to ensure that the product is homogeneous.
  • Application: Spray the nano-coating evenly onto the fabric from a distance of 20-30 cm. Make sure that the entire surface is covered evenly, avoiding product build-up in certain areas.
  • Drying: Allow the fabric to dry in a well-ventilated area. Follow the manufacturer’s instructions for drying times, as these may vary depending on the product.
  • Repeat (if necessary): In some cases, it may be advisable to apply a second coat for optimum protection. Ensure that the first coat is completely dry before proceeding.
  • Care after application: After application, do not wash the fabric for some time (follow the manufacturer’s instructions) to ensure that the nano-coating stabilizes and works properly.

By following these steps, you will be able to effectively apply the nano-coating spray to your fabrics and improve their resistance to stains and water.

Armed Forces

1
2
3
4
5
Desert camouflage uniform
1

The application of coatings such as BSB60 T Series results in the formation of a superhydrophobic and oil-repellent surface, thereby impeding the penetration of water, oils, and chemicals.

2

Treated surfaces repel liquids and contaminants, reducing dirt accumulation and facilitating cleaning, keeping uniforms more hygienic

3

Nanotechnology coatings maintain the breathability and flexibility of fabrics, ensuring comfort even in adverse weather conditions

4

Nanotechnology coatings improve the abrasion and wear resistance of fabrics, prolonging the life of uniforms

5

As a consequence of their self-cleaning and antimicrobial properties, uniforms that have been treated with nanotechnology coatings require less frequent laundering, which results in a reduction in expenses and the time spent on maintenance.

AI-generated image

Water-repellent nanotechnology coatings on military camouflage uniforms offer numerous benefits, enhancing the protection, durability, and comfort of soldiers in various operational conditions.

Info-circled Info-circled For more information contact us

Discover our extensive range of nanotechnology coatings

Anti-fouling Anti-graffiti Anti-slip for Ceramics Address Address icon Anti-slip for Marble Anti-Viral Glass - Ceramic Metal - Plastics Nano Electro Protect Natural Stone Solar Panel Super-Hydrophobic Surface Coating for Metal Temporary Protection Textile

Click Below to See Nanocoatings Product Details for Textile and Leather

Menu

BSB60 T-WB

T-WB is a revolutionary non-toxic super hydrophobic and oleophobic nano coating. It is water-based, breathable and eco-friendly. In addition, it is resistant to harsh detergents and demonstrates excellent easy-cleaning properties with continuous performance up to 10 washes.

Application Surfaces

  • Cotton
  • Suede
  • Canvas
  • Wool
  • Silk
  • Linen
  • Polyester

Do not apply the product on surfaces including:

  • Artificial leather
  • Stone
  • Glass & Ceramic
  • Wood
  • Thermosets & Thermoplastics

Benefits & Key Features

  • Water and oil repellency
  • Stain resistance
  • Breathable coating
  • Easy to clean

Specifications

Packaging 1-5-30 L
Appearance Whitish Liquid
Chemical Resistance 11>pH>1
Dry Film Thickness 90-100 nm
Consumption per Unit Area 60-100 mL/m2
Density @23°C 1.01g/cm3
pH Value 3-5.5
Breathability (EN 1062-1) Category 1
Application Temperature 5°C/45°C (≤50% RH)
Temperature Durability 150°C
Water Repellency (ISO-4920) 100/100
Water Contact Angle 152° @20 µL
Water Contact Angle After “3000”
Wet Scrub (ISO-11998:2006)		 136° @20 µL
Water Sliding Angle 18° @20 µL
Oil Contact Angle 129° @20 µL
Packaging 1-5-30 L
Appearance Whitish Liquid
Chemical Resistance 11>pH>1
Dry Film Thickness 90-100 nm
Consumption per Unit Area 60-100 mL/m2
Density @23°C 1.01g/cm3
pH Value 3-5.5
Breathability (EN 1062-1) Category 1
Application Temperature 5°C/45°C (≤50% RH)
Temperature Durability 150°C
Water Repellency (ISO-4920) 100/100
Water Contact Angle 152° @20 µL
Water Contact Angle After “3000”
Wet Scrub (ISO-11998:2006)		 136° @20 µL
Water Sliding Angle 18° @20 µL
Oil Contact Angle 129° @20 µL

BSB60 T

BSB60 T formula has been developed for fabric surfaces to gain hydrophobic and oleophobic properties against common liquids and stains whilst giving easy-to-clean effect.

Application Surfaces

  • Suede
  • Nubuck
  • Velvet
  • Polyester

Do not apply the product on surfaces including:

  • Thermosets & Thermoplastics
  • Non-absorbent Surfaces

Benefits & Key Features

  • Water and oil repellency
  • Stain resistance
  • Breathable coating
  • Easy to clean

Specifications

Packaging 1-5-30 L
Appearance Colorless Liquid
Chemical Resistance 11>pH>1
Dry Film Thickness 75-100 nm
Consumption per Unit Area 80-100 mL/m2
Density @23°C 0.809 g/cm3
pH Value 2.0
Breathability (EN 1062-1) Category 1
Application Temperature 5°C/45°C (≤50% RH)
Temperature Durability 110°C
Water Repellency (ISO-4920) 100/100
Water Contact Angle 144° @10 µL
Water Contact Angle After “3000”
Wet Scrub (ISO-11998:2006)		 126° @10 µL
Water Sliding Angle 7° @20 µL
Oil Contact Angle 92° @10 µL
Packaging 1-5-30 L
Appearance Colorless Liquid
Chemical Resistance 11>pH>1
Dry Film Thickness 75-100 nm
Consumption per Unit Area 80-100 mL/m2
Density @23°C 0.809 g/cm3
pH Value 2.0
Breathability (EN 1062-1) Category 1
Application Temperature 5°C/45°C (≤50% RH)
Temperature Durability 110°C
Water Repellency (ISO-4920) 100/100
Water Contact Angle 144° @10 µL
Water Contact Angle After “3000”
Wet Scrub (ISO-11998:2006)		 126° @10 µL
Water Sliding Angle 7° @20 µL
Oil Contact Angle 92° @10 µL

BSB60 T1

BSB60 T1 is an economic formula that has been developed for fabric surfaces to gain hydrophobic and oleophobic properties against common liquids and stains whilst giving easy-to-clean effect.

Application Surfaces

  • Suede
  • Nubuck
  • Velvet
  • Polyester

Do not apply the product on surfaces including:

  • Thermosets & Thermoplastics
  • Non-absorbent Surfaces

Benefits & Key Features

  • Water and oil repellency
  • Stain resistance
  • Breathable coating
  • Easy to clean
Packaging 1-5-30 L
Appearance Colorless Liquid
Chemical Resistance 11>pH>1
Dry Film Thickness 75-100 nm
Consumption per Unit Area 80-100 mL/m2
Density @23°C 0.812 g/cm3
pH Value 1.4-1.6
Breathability (EN 1062-1) Category 1
Application Temperature 5°C/45°C (≤50% RH)
Temperature Durability 110°C
Water Repellency (ISO-4920) 100/100
Water Contact Angle 129° @10 µL
Water Contact Angle After “3000”
Wet Scrub (ISO-11998:2006)		 122° @10 µL
Water Sliding Angle 9° @20 µL
Oil Contact Angle 81° @10 µL

BSB60 LC-12

LC-12 is a coating that is applied on natural leather and artificial leather surfaces which gives hydrophobic and oleophobic effects. It is also highly water and dirt repellent which keeps the surfaces away from water, dirt and other liquids.  Suitable materials are listed below:

  • Artificial leather (PU, PVC etc.)
  • Natural leather

Benefits & Key Features

  • Water and oil repellency
  • Stain resistance
  • Breathable coating
  • Easy to clean

Specifications

Packaging 1-5-30 L
Appearance Clear Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Dry Film Thickness √
Dry Film Thickness 0.7-1 µm
Consumption per Unit Area 30-45 mL/m2
Density @23°C 0.86 g/cm3
pH Value 5-5.5
Application Temperature 5°C/45°C (≤50% RH)
Temperature Durability 150°C
Water Contact Angle 135° @10 µL
Water Contact Angle After “3000”
Wet Scrub (ISO-11998:2006)		 117° @10 µL
Water Sliding Angle 18° @20 µL
Oil Contact Angle 105° @10 µL
Packaging 1-5-30 L
Appearance Clear Liquid
Chemical Resistance 12>pH>1
Salt Water Resistance √
Dry Film Thickness √
Dry Film Thickness 0.7-1 µm
Consumption per Unit Area 30-45 mL/m2
Density @23°C 0.86 g/cm3
pH Value 5-5.5
Application Temperature 5°C/45°C (≤50% RH)
Temperature Durability 150°C
Water Contact Angle 135° @10 µL
Water Contact Angle After “3000”
Wet Scrub (ISO-11998:2006)		 117° @10 µL
Water Sliding Angle 18° @20 µL
Oil Contact Angle 105° @10 µL

BSB60 T-PLUS

Bsb60 T-PLUS has been developed for fabric surfaces to gain hydrophobic and oleophobic properties against common liquids and stains whilst giving easy-to-clean effect. It can be applied to a variety of textile surfaces.

Application Surfaces

  • All types of textiles
  • Suede and nubuck surfaces

Do not apply the product on surfaces including:

  • Artificial Leather
  • Stone
  • Glass & Ceramic
  • Wood
  • Metal
  • Hard and Smooth Thermoset&Thermoplastic Surfaces

Benefits & Key Features

  • Water and oil repellency
  • Stain resistance
  • Breathable coating
  • Easy to clean

Specifications

Packaging 1-5-30 L
Appearance Colorless Liquid
Chemical Resistance 11>pH>1
Dry Film Thickness 75-100 nm
Consumption per Unit Area 80-100 mL/m2
Density @23°C 0.805 g/cm3
pH Value 5-6
Breathability (EN 1062-1) Category 1
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability –
Water Repellency (ISO-4920) 100/100
Water Contact Angle 152° @20 µL
Water Contact Angle After “2000”
Wet Scrub (ISO-11998:2006)		 144° @20 µL
Water Sliding Angle 18° @20 µL
Oil Contact Angle 136° @20 µL
Packaging 1-5-30 L
Appearance Colorless Liquid
Chemical Resistance 11>pH>1
Dry Film Thickness 75-100 nm
Consumption per Unit Area 80-100 mL/m2
Density @23°C 0.805 g/cm3
pH Value 5-6
Breathability (EN 1062-1) Category 1
Application Temperature 5°C/30°C (≤50% RH)
Temperature Durability –
Water Repellency (ISO-4920) 100/100
Water Contact Angle 152° @20 µL
Water Contact Angle After “2000”
Wet Scrub (ISO-11998:2006)		 144° @20 µL
Water Sliding Angle 18° @20 µL
Oil Contact Angle 136° @20 µL

BSB60 FIBRE PROTECT COATING

SIO2 & Water-based Superhydrophobic & Oleophobic Coating for Textile Industry

BSB60 Fibre Protect Coating is a ready-to-use spray solution specifically designed for use in the textile industry. This coating provides water and oil-repellent protection for various types of textiles, including synthetic, wool, silk, cotton, linen, technical textiles, home textiles & more.

Application

  • BSB60 Fibre Protect Coating is ready-to-use and should not be diluted. Shake the product well before application.
  • Industrial Dipping Application: The product can be applied using an industrial dipping process with a padding (foulard) machine.
  • Industrial Spray Application: Industrial spray devices are suitable for applying the product. For a long-lasting effect, ensure that surfaces are free of dust, grease, and any residues from cleaning agents.
  • For all surfaces, it is recommended to test for stability and functionality in an inconspicuous area.

Benefits

  • Hydrophobic & Oleophobic
  • Wash resistant (varies between 10-50 washes)
  • No change in look and feel
  • Breathable
  • Air- and steam-permeable
  • Physiologically harmless
  • Temperature resistance up to 450°C (peak temperature)
  • Ready-to-use
  • Suitable for industrial dipping and spray applications
  • Long-lasting effect
  • Designed to be used on variety of textiles surfaces – e.g. synthetic, wool, silk, cotton, linen, technical textiles and home textiles.

Performance & Testing

  • Composition: SiO2 solved in water incl. cross linking agent (please see the corresponding material safety data sheet)
  • Hydrophobic (Water Droplet Test AATCC 193, Spray Test AATCC 22 & DIN EN 24920 (08.92) Spray Test)
  • Oleophobic (according AATCC 118)
  • PFC-Free (according UNI CEN/TS 15968.2010)
  • Abrasion Resistance (according DIN EN ISO 12 947-2:1999-04 – 5000 cycles)
  • Longevity (Artificial weathering with Xenon arc lamps according DIN EN ISO 4892- 1:2006 – 550h (five weathering years)
  • REACH Conformity
  • ZDHC MRSL V2.0 Conformity

Drying and Hardening

  • Apply the product formulation onto the surface.
  • Allow the surface to dry completely.
  • Fixation of dried surface for 90 seconds at a temperature of 160 degrees. This step is absolutely necessary.

Consumption

Consumption varies depending on the surface’s absorbency, ranging from 20 to 50 ml/m².

Download Download Download Technical Data Sheet
Mail Mail Get in Touch with Our Experts to Learn More